PRODUCT PAGE STEADYCAM BASSON STEADY CAMERA STABILIZER, THE BEST SOURCE FOR BUYING STEADYCAM-CAMERA STABILIZER-STEADICAM-CAMERA GIMBAL-DSLR GIMBAL

WE ARE MANUFACTURERS AND DESIGNERS OF PROFESSIONAL CAMERA STABILIZERS, THE BEST SOURCE FOR STEADICAM OPERATORS AND FILMMAKERS WORLDWIDE. 

WE PROVIDE THE MOST ADVANCED CAMERA STABILIZATION SYSTEMS FOR THE COMMUNITY OF MOTION PICTURE CAMERA STABILIZATION OPERATORS FROM ALL OVER THE WORLD SINCE 1997. WE PROVIDE THE VERY BEST IN CUSTOMER SERVICE WITH OUR UNIQUE WORLDWIDE WARRANTY AND CUSTOMER SUPPORT ON THE NET. 

Steadicam United States Oficial Store, steadycam United States, Steadicam USA, Steadycam USA, Steadicam, Steadycam, camera stabilizer online store USA, 3 axis gimbal United States, gimbal stabilizer United States, camera gimbal, dslr gimbal, dslr stabilizer, camera stabilizer dslr, video camera stabilizer, camera stabilizer gimbal, best gimbal, best camera stabilizer, arri trinity, arri trinity rig, camera gimbal, steadicam rig, steadicam vs gimbal, the steadicam history

Rotary head Endless 3 Steadycam-Basson Steady-Camera stabilizer, payload 7,5kgs

$8,200.00Price

Rotary head with electronic horizon and electronic tilt, like the one on the ENDLESS 3.

Convert your own steadycam into a hybrid camera stabilizer with this rotary head you will get an 8 AXIS CAMERA STABILIZER with ELECTRONIC HORIZON & PITCH , It is perfect for cameras from 2 Lbs = 1kgs up to 16 Lbs = 7,5kgs.
Price includes Free Shipping Worldwide door to door delivery by Fedex & Free Custom taxes up to 98%.

 

What's New with this new version rotary head ENDLESS 3?

The camera weight capacity now it's the same for both the pitch and horizontal motors up to 7,5kgs. 

The pitch motor can be locked or activated depending on the length of your camera.

 

Now supports bigger cameras, the maximum recommended camera sizes are, 45cm length, 20cms height and 18cm width, and if you turn off the pitch motor you can use cameras, up to 48cm length, 22cm height and 18cm width.

 

The Electronic Rotary Head is Compatible with the following cameras:

 

ARRI ALEXA mini, KINEFINITY MAVO, TERRA. RED Epic, Weapon, Dragon, Helium, Raven, Scarlet. CANON C200, C300, CANON 5D, and all DSLRs full frame such as PANASONIC S1, S1R, SONY A7, NIKON D850. Also compatible with BLACK MAGIC POCKET, and all micro 4/3 cameras such as PANASONIC GH5, GH5S, G9. Panasonic HC X1 4K Camcorder, Canon XF 400 & 405 4K Video Camera, Panasonic Hc-X1000 4K Camera, Panasonic AG DVX200 4K Pro Camcorder, Sony PXW-Z150 XDCAM Camcorder, Sony PXW-Z100 Pro 4k Camcorder, Sony FDRAX1 4K Video Camera, JVC HM-200 4K Camcorder, Sony FDR-AX100 4K Camera, JVC GY-HMQ10U 4K Camcorder, Sony PMW-F55 – Sonys Flagship for 4K, Panasonic Lumix DMC-GH4 4K Camera, Canon Cinema EOS C500 4K Camera, Sony NEX-FS700RH 4K Ready Super 35mm, and many more.

 

What do you need to make this rotary head compatible with your own steadicam?

You just need this 3 things to ad this rotary head to your own steadycam:

 

1- First of all you need a heavy weight lifting steadicam and also with a longer post at least as the steadicam M1 that has a total length of 104cm. Do not use the following models because they are two short or two low weight capacity such as SHADOW, ARCHER, ARCHER2, ZEPHYR, or AERO. The steadicam must be capable to support cameras of 15kgs or more, so it must have shock absorber arm capable to support 33kgs or more, but you also need to have a longer post if possible fully extended should be at least 105cm in order to be capable to hold the rotary head, so any professional camera stabilizer with this specs will be ok.

 

2- Then the steadicam must have an output of 24volts on top of the post just to power the rotary head with two v-mount batteries, then you will have to make a cable to match the steadicam 24v output to match with our 24 input in the rotary head, we will provide a wire that will have our male connector that will plug in our rotary head, but you will need to make on your own the other end of the wire with the output to match the  24v output of the steadicam.

If you have 24volts output is ok, if you don't have 24volts output then you can buy to us an accessory that ads 24v to your steadycam, its a a double v-mount socket with voltage regulator that comes with a 5 feet cable that you must ad to the bottom of your steadycam.

 

3.- You will also need a small lcd monitor to preview the video we recommend a small one such as smallhd502, we provide a clamp to add this monitor to your handle with a diameter for 32mm, if you have a different diameter then you must buy a clamp to match you handle.

Then we provide an articulated clamp that must be attached to the handle of the gimbal to attach any 5 inch monitor such as feelworld or small hd, this is for the monitor that goes monitor that goes on the handle of the gimbal.
To power this monitor you must have a monitor with a back plate for small batteries such as sony NPF970 because you will not have 12v output in the middle of the post as we have in our hybrid camera stabilizers due that the center post of our hybrid steadies are already wired inside the post and the steadicam will not have that, and finally the connection of HDMI output from the camera to the monitor that goes on the handle of the gimbal will be connected from outside the post.

 

This new hybrid camera gimbal head is easy comparable to the head on top of the Arri trinity rig, or to the arri maxima head, or to the mk-v ar rotary head systems, all different designs and products with one thing in common, all high end hybrid electro mechanic gimbal steadicam camera stabilizers. All brand names, models, trademarks, and registered trademarks mentioned in this description are property of their legal owners and are being used here only for description.

 

Variante 1
  • Product Info

    Rotary head with electronic horizon and electronic tilt, like the one on the ENDLESS 3.

     

    Convert your own steadycam into a hybrid camera stabilizer with this rotary head you will get an 8 AXIS CAMERA STABILIZER with ELECTRONIC HORIZON & PITCH.

     

    It is perfect for cameras from 2 Lbs = 1kgs up to 16,5 Lbs = 7,5kgs.

     

    Price includes Free Shipping Worldwide door to door delivery by Fedex & Free Custom taxes up to 98%.

     

    Now supports bigger cameras, the maximum recommended camera sizes are, 45cm length, 20cms height and 18cm width, and if you turn off the pitch motor you can use cameras, up to 48cm length, 22cm height and 18cm width.

     

    The Electronic Rotary Head is Compatible with the following cameras:

     

    ARRI ALEXA mini, KINEFINITY MAVO, TERRA. RED Epic, Weapon, Dragon, Helium, Raven, Scarlet. CANON C200, C300, CANON 5D, and all DSLRs full frame such as PANASONIC S1, S1R, SONY A7, NIKON D850. Also compatible with BLACK MAGIC POCKET, and all micro 4/3 cameras such as PANASONIC GH5, GH5S, G9. Panasonic HC X1 4K Camcorder, Canon XF 400 & 405 4K Video Camera, Panasonic Hc-X1000 4K Camera, Panasonic AG DVX200 4K Pro Camcorder, Sony PXW-Z150 XDCAM Camcorder, Sony PXW-Z100 Pro 4k Camcorder, Sony FDRAX1 4K Video Camera, JVC HM-200 4K Camcorder, Sony FDR-AX100 4K Camera, JVC GY-HMQ10U 4K Camcorder, Sony PMW-F55 – Sonys Flagship for 4K, Panasonic Lumix DMC-GH4 4K Camera, Canon Cinema EOS C500 4K Camera, Sony NEX-FS700RH 4K Ready Super 35mm, and many more.

     

     

    What's New with this new version rotary head ENDLESS 3?

     

    The pitch motor can be locked or activated depending on the length of your camera.

     

    Now supports bigger cameras, the maximum recommended camera sizes are, 45cm length, 20cms height and 18cm width, and if you turn off the pitch motor you can use cameras, up to 48cm length, 22cm height and 18cm width.

     

    What do you need to make this rotary head compatible with your own steadicam?

    You just need this 3 things to ad this rotary head to your own steadycam:

     

    1- First of all you need a heavy weight lifting steadicam and also with a longer post at least as the steadicam M1 that has a total length of 104cm. Do not use the following models because they are two short or two low weight capacity such as SHADOW, ARCHER, ARCHER2, ZEPHYR, or AERO. The steadicam must be capable to support cameras of 15kgs or more, so it must have shock absorber arm capable to support 33kgs or more, but you also need to have a longer post if possible fully extended should be at least 105cm in order to be capable to hold the rotary head, so any professional camera stabilizer with this specs will be ok.

     

    2- Then the steadicam must have an output of 24volts on top of the post just to power the rotary head with two v-mount batteries, then you will have to make a cable to match the steadicam 24v output to match with our 24 input in the rotary head, we will provide a wire that will have our male connector that will plug in our rotary head, but you will need to make on your own the other end of the wire with the output to match the  24v output of the steadicam.

    If you have 24volts output is ok, if you don't have 24volts output then you can buy to us an accessory that ads 24v to your steadycam, its a a double v-mount socket with voltage regulator that comes with a 5 feet cable that you must ad to the bottom of your steadycam.

     

    3.- You will also need a small lcd monitor to preview the video we recommend a small one such as smallhd502, we provide a clamp to add this monitor to your handle with a diameter for 32mm, if you have a different diameter then you must buy a clamp to match you handle.

    Then we provide an articulated clamp that must be attached to the handle of the gimbal to attach any 5 inch monitor such as feelworld or small hd, this is for the monitor that goes monitor that goes on the handle of the gimbal.
    To power this monitor you must have a monitor with a back plate for small batteries such as sony NPF970 because you will not have 12v output in the middle of the post as we have in our hybrid camera stabilizers due that the center post of our hybrid steadies are already wired inside the post and the steadicam will not have that, and finally the connection of HDMI output from the camera to the monitor that goes on the handle of the gimbal will be connected from outside the post.

    This rotary head comes with an electronic board controller that will help you hold the camera HORIZONTALLY STABLE  and tilt balanced all the time.


    And you still have the power to control the rotation with your hand on the gimbal as always to point your camera wherever you want. 

     

    With this version you can also lock the electronic tilt or pitch motor, depending on the shot, you may want to disconnect and lock the PITCH motor to control the PITCH and ROTATION manually with your hands as with any regular steady in order to let you point your camera wherever you want.

     

    This way you will let you tilt up and down up the camera up to 45 degrees without loosing the Electronic horizon stabilization.

     

    The main difference between ENDLESS and INFINIA, is that ENDLESS also support 1 inch taller cameras and comes with both electronic horizon and electronic pitch or tilt motors.

     

    Both ENDLESS and INFINIA rotary heads have the different load capacity up to 7,5kgs.


    By adding this rotay head to your own professional steadycam you will be able to go from High mode to low mode in just 3 seconds.

    It works with SILENT MOTORS, It's noiceless, so you can now use at live events and also use the sound of your camera microphone. 

     

    Now it comes with a NEW GIMBAL MONITOR MOUNT, that allows you to have the monitor pointing directly to your face at a reduced distance regardless of the angle you are pointing the camera and regardless of the axis of the steady.

     

    You can now shoot backwards while walking forward with your steady without compromising framing your shoot and also allows you to verify without any effort if the FOCUS IS CORRECT OR NOT. 


    So there are NO MORE BLIND SPOTS. This new monitor mount comes with a clamp for a handle of 32mm, then you must ad your own lcd monitor with a battery on its back such as the smallhd502.

     

    And also somes with an HDMI cable, this new monitor clamp comes with a male 1/4" screw to hold any LCD monitor.

     

    The other option with this gimbal monitor mount, due that the new cameras comes with bluetooth, is to use your own small tablet such as an ipad mini, iphone or android smart phone to use it as a monitor just by adding any holder compatible with your device with a female 1/4" socket.

     

    This new hybrid camera gimbal head is easy comparable to the head on top of the Arri trinity rig, or to the arri maxima head, or to the mk-v ar rotary head systems, all different designs and products with one thing in common, all high end hybrid electro mechanic gimbal steadicam camera stabilizers. All brand names, models, trademarks, and registered trademarks mentioned in this description are property of their legal owners and are being used here only for description.

  • Packing List

    Packing List 
    1 Hybrid Rotary head with electronic horizon and tilt or pitch.
    1 Gimbal monitor mount.
    1 Introductory Cd rom, with start up demo video as well as a pdf manual
    1 Warranty card + set up guide.

    We provide LIFETIME SUPPORT direct from our factory to the hole world, by email or phone 365 days a year. 
    Picture taken with camera, light, wireless trasnmitter and microphne not included

    WHAT DO YOU NEED, THAT IT IS NOT INCLUDED THAT WE DO NOT SELL:
    Any 12v Lcd monitor. we highly recommend a smallhd 502.
    if you do not have 24v on your steadycam the you will need to buy to us an accessory to ad 24v to your steady and then you must buy 2 V-mount batteries, and its charger.

    We accept bank transfer as well as PAY PAL payments, with this last option we will only ship your purchase to Pay Pal verified address, and also paypal fees must be paid by the customer, this fees increase the price a 5,5%.

    The price of the steady includes FREE shipping Worldwide door to door delivery by Fedex.

logo-email.png

Send Us an E-mail

Call Us by Phone or Whatsapp

+54 (911) 4472-6757

We're Here To Help

Call Us at +1 (305) 83-44752

Connect with us

  • Twitter
  • Steadycam facebook
  • Steadycam Instagram
  • Basson Steady camera stabilizers RSS
  • Steadycam Youtube channel
  • Steadycam Pinterest

gimbal stabilizer, camera stabilizing, camera gimbal, dslr gimbal

steadycam, stedicam, camera stabilizer, 3 axis gimbal, gimbal stabilizer

Steadycam Basson Steady camera stabilizer
Warehouse in United States

Miami, FL 33126 - United States

+1 (305) 83-44752

Steadycam Basson Steady camera stabilizer

Factory & Showroom

Buenos Aires, Argentina

Tel/ Whatsapp: + (54911) 4472-6757

nyfa- New york film academy logo blanco.
los angeles film school logo 2 blanco.pn
Cinescopophilia-Logo-Small2.png
steadicam forum logo 2.png
American_Film_Institute_(AFI)_logo.svg.p

Links of Interest & Partners of Steadycam Basson Steady camera stabilizers

Legal Notice: All brand names, photos, models, trademarks, and registered trademarks mentioned in this blog or websites are property of their legal owners and are being used here only for description.

©2019 Web design by Basson Steady

All rights reserved. Todos los derechos reservados

GET IN TOUCH

We'd love to hear from you

STEDICAM, STEADYCAM, CAMERA STABILIZER, CAMERA STABILIZERS, STEADICAMS, STEADYCAMS, STEADICAM RIGS, STEADICAM RIG, STEADYCAM RIG, BUY STEADICAM, COMPRAR STEADICAM, 5D STEADICAM, 7D STEADICAM, DSLR STEADICAM RIG, DSLR VIDEO STABILIZER, DSLR, STEADICAM RIG, STEADYCAM FOR DSLR, BEST DSLR STEADICAM, CAMERA STEADICAM, CAMERA STABILIZER, DSLR VIDEO CAMERA STABILIZER, FLYCAM, GLIDECAM, STEADICAM SK2, DV STEADICAM, STEADICAM DVS, STEADYCAM BUY, STEADICAM SALE, STEADICAM OPERATORS ASSOCIATION, STEADICAM WORKSHOPS, ADVANCED STEADICAM TECHNIQUES, CAMERA STABILIZING SYSTEM, GLIDECAM STEADICAM, STABILISATEUR DE CAMÉRA, STEADICAM CLIPPER, SACHTLER ARTEMIS, SACHTLER STEADICAM, TIFFEN STEADICAM, GYRO CAMERA STABILIZER, STEADICAM OPERATORS, STEADICAM RENTAL, GLIDECAM STABILIZERS, VARIZOOM STEADICAM, GARRETT BROWN, SUPER FLY CAM, ARTEMIS STEADICAM, STEADICAM ARCHER, MOVCAM, BEST CAMERA STABILIZER, KAMERA STABILISIERUNGS, STEADY RIG, GLIDECAM INDUSTRIES, STEADICAM EFP, MANFROTTO STEADYCAM, GARRET CAM, GARRETT BROWN, FLYCAM USA, FLYCAMUSA, STEADICAM FOR RED ONE, STEADICAM FOR RED, VIDEO CAMERA STABILIZER, ARRI TRINITY, ARRI STEADICAM, ARRI TRYNITY RIG, MOVCAM, MOVCAM RIGS, MOVCAM STEADICAM, GLIDECAM, GLIDECAM STEADYCAM, GLIDECAM STABILIZERS, MK-V AR, STEADICAM FOR RED CAMERA, STEADICAM FOR RED EPIC, STEADICAM FOR RED SCARLET, RED USER, STEADICAM FOR DSLR, STEADICAM FORUM, STEADICAM FORUM EU, PROFESSIONAL CAMERA STABILIZER, PROFESSIONAL STEADICAM, PREFSSIONAL STEADYCAM, STEADICAM PROFESIONAL, ESTABILIZADOR PARA VIDEOCAMARAS, STEADICAM SHADOW, STEADIMATE, STEADICAM, STEADIMATE, STEADICAM ZEPHYR, STEADICAM M1, STEADICAM AERO, STEADICAM ARCHER 2, STEADICAM GPI, GLIDECAM DEVIN GRAHAM, DEVIN GRAHAM, GLIDECAM STABILIZERS, GLIDECAM STEADICAM, GLIDECANM STEADYCAM, GLIDECAM CENTURION, GLIDECAM X10, GLIDECAM X20, GLIDECAM X30, GLIDECAM X45, EASYRIG, EASYRIG MINIMAX, EASYRIG 2.5, EASYRIG CINEMA 3, EASYRIG VARIO 5, FLOWCINE, FLOWCINE SERENE, FLOWCINE GRAVITY ONE, CAME TV PRO, CAMERA STABILIZER, CAMERA OPERATOR, SOCIETY OF CAMERA OPERATOR, INTERNATIONAL CINEMATOGRAPHERS GUILD, VIDEOMAKER MAGAZINE, INDIE FILMMAKER, INDIE FILMMAKER MAGAZINE

+(54 911) 4472-6757

  • White Facebook Icon

Find us on Facebook