ENDLESS 4 BLACKBEE, new release Basson Steady 8 AXIS CAMERA STABILIZER with ELECTRONIC HORIZON & PITCH, It is perfect for cameras from 2 Lbs = 1kgs up to 14 Lbs = 6kgs.
And if you are just using the steady without the rotary head, the range of weight supported is from 6 lbs = 3kgs up to 27 lbs = 12,5kgs. The weight supported inside the GIMBAL rotary head is lower due that the rotary head already weights around 7,6 kgs = 16,5 Lbs, and due to the higher strength needed to hold it.
Price includes Free Shipping Worldwide door to door delivery by Fedex & Free Custom taxes up to 98%.
What's New with this new version ENDLESS 4 BLACKBEE Basson Steady?
Now it is compatible with most Dji RONIN RS2 and Dji RONIN 4D gimbals or other similar gimbals.
At the top of the center post now we provide D-TAP 14,8v to power your DJI Ronin RS2 & Ronin 4D gimbals. You can also attach your phone as a monitor to the handle of the steady to control the Dji Ronin RS2 gimbal with the App wireless.
Now you can mount to one the of the clamps on the handle of the steady a wireless Tilta Thumb controller for the DJI Ronin RS2 gimbal and also attach it to the handle of our steady to control the lens focus as well as to press record start and stop.
You can also add to the Dji gimbal the 3d focus system lidar scanner to the Dji Ronin RS2 and Dji Ronin 4d gimbals to add autofocus capability to non autofocus cinema lenses.
You will also be able to attach to one the of the clamps on the handle of the steady the monitor of the Ronin 4d. This wireless High-Bright Remote Monitor can connect to the Hand Grips of Ronin 4D. This enables remote control of focus and gimbal movements with high precision, starting and stopping of recording, which can now be remotely adjusted even when Ronin 4D is mounted on top of our Hybrid gimbal-steady camera stabilizer.
Also on top of the center post now it has HDMI, SDI, USB and D-TAP 14,8v and the plug with 25volt output to power the gimbal rotary head.
Also Inside the GImbal rotary head now it has SDI & HDMI, as well as D-TAP 14,8v to power your camera, yes as you hear, you can now remove the heavy battery from your ARRI or RED CINEMA cameras and use the power from the V-MOUNT batteries that you can put at the bottom of the center post. Then it also has a USB-C cable to power any accessory attached to the camera.
This new steady can be used in 3 different modes, FIRST as a regular steady, SECOND you can add any Dji RONIN gimbal on top of the steady, and THIRD with the gimbal rotary head.
-The camera weight capacity now it's the same for both the pitch and horizontal motors up to 8kgs.
-The pitch motor can be locked or activated depending on the length of your camera or depending on the type of shoot you are looking for, if you want to change the tilt or pitch angle f your camera to point up or down as with all mechanic steadies but with electronic stabilized horizon.
With this new version now If you activate the pitch motor the maximum camera weight capacity it's the same 8kgs.
Now supports bigger cameras, the maximum recommended camera sizes are, 45cm length, 20cms height and 18cm width, but as you see on the pictures it can hold cameras up to 50cm lenght such as the Arri alexa mini with both motors ON, and if you turn off the pitch motor you can use cameras, up to 48 cm length, 22cm height and 18cm width.
This NEW version has several differences, such as the new isolate arm with decompressor which reduces the fatigue and duplicates the time you can hold it.
In the lower part of the central post now includes a sliding base with two sockets for v-mount batteries, which allows having a better foot that helps to keep the stabilizer more stable and a better balance control since sliding this base helps Improve the rolling, due to the physical laws with greater foot better stability.
It comes with 3 v-mount sockets instead of 1, which increases the time of usage by 3, and the cneter post has inside 3 USB cables thta can be plugged to the v-mount batteries that these days allmost all v-mount batteries comes with USB output port.
The new gimbal handle puts total control over your camera into the palm of your hand, because now it has 3 articulated clamps with 1/4 male screw to attach any 5 inch or 7 inch monitor as well as a phone to control the camera via app, and a third clamp to attach a wireless lens control to control the zoom or focus of your lens. ON THE HANDLE YOU HAVE NOW MULTIPLE CONNECTIONS TO POWER ANY DEVICE, now it comes with HDMI, SDI, USB-C and APPLE I-PHONE ligtning cable.
Another tip is that you can use the female lighter plug that is located at the bottom of the center post, to plug any a male lighter plug with USB charger with dual outputs to power or to charge any of the accessories you may want to use with this new hybrid camera stabilizer.
Today all new devices have can be charged via USB, so you can take advantage of that and power or charge any device such as the wireless lens controller hand unit and motor, as well as any other device such as your Cell Phone that can be used to monitor and to take full control of your video camera via app, or to power any USB led light, you can also charge or power any USB power bank.
For example on this photo we are using the the Male lighter plug Smart Car Finder from ZUS. that its not only a high quality dual USB charger but also a safety measure for the steady that thru an app on your cellphone will tell you where is your steady on a map. So each time you turn on the steady the app will point exactly where it is on a map thru the app on your cell phone.
The Electronic Rotary Head is Compatible with the following cameras:
RED KOMODO, RED Epic, RED Weapon, RED Dragon, RED Helium, RED Raven, RED Scarlet, KINEFINITY MAVO, TERRA. CANON C200, C300, CANON 5D, and all DSLRs full frame such as PANASONIC S1, S1R, SONY A7, NIKON D850.
Also compatible with BLACK MAGIC POCKET PRO 6K, and all DSLR’s, as well as with all micro 4/3 cameras such as PANASONIC gh6, GH5, GH5S, G9, Panasonic HC X1 4K Camcorder, Canon XF 400 & 405 4K Video Camera, Panasonic Hc-X1000 4K Camera, Panasonic AG DVX200 4K Pro Camcorder, Sony PXW-Z150 XDCAM Camcorder, Sony PXW-Z100 Pro 4k Camcorder, Sony FDRAX1 4K Video Camera, JVC HM-200 4K Camcorder, Sony FDR-AX100 4K Camera, JVC GY-HMQ10U 4K Camcorder, Sony PMW-F55 – Sonys Flagship for 4K, Panasonic Lumix DMC-GH4 4K Camera, Canon Cinema EOS C500 4K Camera, Sony NEX-FS700RH 4K Ready Super 35mm, and many more.
This new Basson Steady 8 axis hybrid camera stabilizers are easy comparable to the Arri trinity rig, or to the mk-v ar rotary head systems, all different designs and products with one thing in common, all high end hybrid electro mechanic gimbal camera stabilizers.
All brand names, models, trademarks, and registered trademarks mentioned in this description are property of their legal owners and are being used here only for description.
FACTORY REFURBISHED:
If available the factory refurbished version, for more details on Factory refurbished items please go to SUPPORT section WARRANTY to read more.
In this particular case the factory refurbished and the regular versions have the same max payload.
In other products see carefully that the max payload may be different when compaired to the regular version.
