PRODUCT PAGE BASSON STEADY CAMERA STABILIZER.

THE BEST SOURCE FOR BUYING WEARABLE CAMERA STABILIZERS.

TOP RATED CAMERA STABILIZERS SYSTEMS BODY MOUNTED.

We are manufacturers and designers of professional camera stabilizers.

The best source for filmmakers worldwide.

We provide the most advanced camera stabilizers for the camera stabilizer operators.

Also for the community of motion picture from all over the world since 1997.

We have the best customer service with our worldwide warranty.

Only the Rotary head of the Endless 4 with electronic horizon and electronic tilt, like the one on the ENDLESS 4, convert your own camera stabilizer into a hybrid camera stabilizer with this rotary head you will get an 8 AXIS CAMERA STABILIZER with ELECTRONIC HORIZON & PITCH, It is perfect for cameras from 2 Lbs = 1kgs up to 16 Lbs = 7,5kgs.
Price includes Free Shipping Worldwide door to door delivery by Fedex & Free Custom taxes up to 98%.

What's New with this new version rotary head ENDLESS 4?

The camera weight capacity now it's the same for both the pitch and horizontal motors up to 7,5kgs, the pitch motor can be locked or activated depending on the length of your camera.

Now supports bigger cameras, the maximum recommended camera sizes are, 48cm length, 20cms height and 18cm width, but as you see on the pictres it can hold cameras up to 50cm lenght such as the arri alexa mini with both motors ON, and if you turn off the pitch motor you can use cameras, up to 52 cm length, 22cm height and 18cm width.

The Electronic Rotary Head is Compatible with the following cameras:

ARRI ALEXA mini, KINEFINITY MAVO, TERRA. RED Epic, Weapon, Dragon, Helium, Raven, Scarlet, CANON C200, C300, CANON 5D, and all DSLRs full frame such as PANASONIC S1, S1R, SONY A7, NIKON D850.

Also compatible with BLACK MAGIC POCKET, and all micro 4/3 cameras such as PANASONIC GH5, GH5S, G9, Panasonic HC X1 4K Camcorder, Canon XF 400 & 405 4K Video Camera, Panasonic Hc-X1000 4K Camera, Panasonic AG DVX200 4K Pro Camcorder, Sony PXW-Z150 XDCAM Camcorder, Sony PXW-Z100 Pro 4k Camcorder, Sony FDRAX1 4K Video Camera, JVC HM-200 4K Camcorder, Sony FDR-AX100 4K Camera, JVC GY-HMQ10U 4K Camcorder, Sony PMW-F55 – Sonys Flagship for 4K, Panasonic Lumix DMC-GH4 4K Camera, Canon Cinema EOS C500 4K Camera, Sony NEX-FS700RH 4K Ready Super 35mm, and many more.

What do you need to make this rotary head compatible with your own camera stabilizer

You just need this 3 things to ad this rotary head to your own camera stabilizer:

1- First of all you need a heavy weight lifting camera stabilizerand also with a longer post at least as the camera stabilizer M1 that has a total length of 104cm.

We do not suggest to use our rotary head with the following models of camera stabilizers because they are two short or two low weight capacity such as SHADOW, ARCHER, ARCHER2, ZEPHYR, or AERO.

The camera stabilizer must be capable to support cameras of 15kgs or more, so it must have shock absorber arm capable to support 33kgs or more, but you also need to have a longer post if possible fully extended should be at least 105cm in order to be capable to hold the rotary head, so any professional camera stabilizer with this specs will be ok.

2- Then the camera stabilizer must have an output of 24volts on top of the post just to power the rotary head with two v-mount batteries, then you will have to make a cable to match the camera stabilizer 24v output to match with our 24v input in the rotary head, we will provide a wire that will have our male connector that will plug in our rotary head, but you will need to make on your own the other end of the wire with the output to match the 24v output of the camera stabilizer.

If you have 24volts output is ok, if you don't have 24volts output then you can buy to us an accessory that add 24v to your camera stabilizer, its a a double v-mount socket with voltage regulator that comes with a 5 feet cable that you must ad to the bottom of your camera stabilizer.

3.- You will also need a small lcd monitor to preview the video we recommend a small one such as smallhd502 or similar, we provide a clamp to add this monitor to your handle with a diameter for 32mm, if you have a different diameter then you must buy a clamp to match you handle.

Then we provide an articulated clamp that must be attached to the handle of the gimbal to attach any 5 inch monitor such as feelworld or small hd, this is for the monitor that goes monitor that goes on the handle of the gimbal.

To power this monitor you must have a monitor with a back plate for small batteries such as sony NPF970 because you will not have 12v output in the middle of the post as we have in our hybrid camera stabilizers due that the center post of our hybrid steadies are already wired inside the post and the camera stabilizer will not have that, and finally the connection of HDMI output from the camera to the monitor that goes on the handle of the gimbal will be connected from outside the post.

All brand names, models, trademarks, and registered trademarks mentioned in this description are property of their legal owners and are being used here only for description.

Only the Rotary head Endless 4 Basson Steady Camera stabilizer, payload 7,5kgs

$8,300.00

Quantity

Rotary head with electronic horizon and electronic tilt, like the one on the ENDLESS 3.

Convert your own camera stabilizer into a hybrid camera stabilizer with this rotary head you will get an 8 AXIS CAMERA STABILIZER with ELECTRONIC HORIZON & PITCH, it is perfect for cameras from 2 Lbs = 1kgs up to 16,5 Lbs = 7,5kgs.

Price includes Free Shipping Worldwide door to door delivery by Fedex & Free Custom taxes up to 98%.

Now supports bigger cameras, the maximum recommended camera sizes are, 48cm length, 20cms height and 18cm width, but as you see on the pictres it can hold cameras up to 50cm lenght such as the arri alexa mini with both motors ON, and if you turn off the pitch motor you can use cameras, up to 52 cm length, 22cm height and 18cm width.

The Electronic Rotary Head is Compatible with the following cameras:

ARRI ALEXA mini, KINEFINITY MAVO, TERRA. RED Epic, Weapon, Dragon, Helium, Raven, Scarlet. CANON C200, C300, CANON 5D, and all DSLRs full frame such as PANASONIC S1, S1R, SONY A7, NIKON D850.

Also compatible with BLACK MAGIC POCKET, and all micro 4/3 cameras such as PANASONIC GH5, GH5S, G9, Panasonic HC X1 4K Camcorder, Canon XF 400 & 405 4K Video Camera, Panasonic Hc-X1000 4K Camera, Panasonic AG DVX200 4K Pro Camcorder, Sony PXW-Z150 XDCAM Camcorder, Sony PXW-Z100 Pro 4k Camcorder, Sony FDRAX1 4K Video Camera, JVC HM-200 4K Camcorder, Sony FDR-AX100 4K Camera, JVC GY-HMQ10U 4K Camcorder, Sony PMW-F55 – Sonys Flagship for 4K, Panasonic Lumix DMC-GH4 4K Camera, Canon Cinema EOS C500 4K Camera, Sony NEX-FS700RH 4K Ready Super 35mm, and many more.

What's New with this new version rotary head ENDLESS 3?

The pitch motor can be locked or activated depending on the length of your camera.

Now supports bigger cameras, the maximum recommended camera sizes are, 45cm length, 20cms height and 18cm width, and if you turn off the pitch motor you can use cameras, up to 48cm length, 22cm height and 18cm width.

What do you need to make this rotary head compatible with your own camera stabilizer?

You just need this 3 things to ad this rotary head to your own camera stabilizer:

1- First of all you need a heavy weight lifting camera stabilizer and also with a longer post at least as the camera stabilizer M1 that has a total length of 104cm. We do not recommend to use the following camera stabilizer models because they are two short or two low weight capacity such as SHADOW, ARCHER, ARCHER2, ZEPHYR, or AERO.

The camera stabilizer must be capable to support cameras of 15kgs or more, so it must have shock absorber arm capable to support 33kgs or more, but you also need to have a longer post if possible fully extended should be at least 105cm in order to be capable to hold the rotary head, so any professional camera stabilizer with this specs will be ok.

2- Then the camera stabilizer must have an output of 24volts on top of the post just to power the rotary head with two v-mount batteries, then you will have to make a cable to match the camera stabilizer 24v output to match with our 24 input in the rotary head, we will provide a wire that will have our male connector that will plug in our rotary head, but you will need to make on your own the other end of the wire with the output to match the 24v output of the camera stabilizer.

If you have 24volts output is ok, if you don't have 24volts output then you can buy to us an accessory to add 24v to your camera stabilizer, this accessory comes with a double v-mount socket with voltage regulator that comes with a 5 feet cable that you must ad to the bottom of your camera stabilizer.

3.- You will also need a small lcd monitor with HDMI in and out to preview the video we recommend a small compact design such as smallhd or feelworld, we provide a clamp to add this monitor to your handle with a diameter for 32mm, if you have a different diameter then you must buy a clamp to match you handle.

Then we provide an articulated clamp that must be attached to the handle of the gimbal to attach any 5 inch monitor such as feelworld or small hd, this is for the monitor that goes monitor that goes on the handle of the gimbal.

To power this monitor you must have a monitor with a back plate for small batteries such as sony NPF970 because you will not have 12v output in the middle of the post as we have in our hybrid camera stabilizers due that the center post of our hybrid steadies are already wired inside the post and the camera stabilizer will not have that, and finally the connection of HDMI output from the camera to the monitor that goes on the handle of the gimbal will be connected from outside the post.

This rotary head comes with an electronic board controller that will help you hold the camera HORIZONTALLY STABLE and tilt balanced all the time.

And you still have the power to control the rotation with your hand on the gimbal as always to point your camera wherever you want, with this version you can also lock the electronic tilt or pitch motor, depending on the shot, you may want to disconnect and lock the PITCH motor to control the PITCH and ROTATION manually with your hands as with any regular steady in order to let you point your camera wherever you want.

This way you will be able to tilt up and down up the camera up to 45 degrees without loosing the Electronic horizon stabilization.

The main differences between ENDLESS and INFINIA, is that ENDLESS also support 1 inch taller cameras and comes with both electronic horizon and electronic pitch or tilt motors, both ENDLESS and INFINIA rotary heads have the different load capacity up to 7,5kgs.
By adding this rotary head to your own professional camera stabilizer you will be able to go from High mode to low mode in just 3 seconds, it works with SILENT MOTORS, It's noiceless, so you can now use at live events and also use the sound of your camera microphone.

Now it comes with a NEW GIMBAL MONITOR MOUNT, that allows you to have the monitor pointing directly to your face at a reduced distance regardless of the angle you are pointing the camera and regardless of the axis of the steady.

You can now shoot backwards while walking forward with your steady without compromising framing your shoot and also allows you to verify without any effort if the FOCUS IS CORRECT OR NOT.

So there are NO MORE BLIND SPOTS, this new monitor mount comes with a clamp for a handle of 32mm, then you must ad your own 5" or 7" lcd monitor with hdmi in and out with a battery socket on its back, and also somes with an HDMI cable, this new monitor clamp comes with a male 1/4" screw to hold any LCD monitor.

The other option with this gimbal monitor mount, due that the new cameras comes with bluetooth, is to use your own small tablet such as an ipad mini, iphone or android smart phone to use it as a monitor just by adding any holder compatible with your device with a female 1/4" socket.

This new hybrid camera gimbal head is easy comparable to the head on top of the Arri trinity rig, or to the arri maxima head, or to the mk-v ar rotary head systems, all different designs and products with one thing in common, all high end hybrid electro mechanic gimbal camera stabilizers.

All brand names, models, trademarks, and registered trademarks mentioned in this description are property of their legal owners and are being used here only for description.
Packing List
1 Hybrid Rotary head with electronic horizon and tilt or pitch
1 Gimbal monitor mount

1 cable ( HDMI+USB-C+DTAP ) or ( SDI+USB-C+DTAP) you have to choose which option you want.
1 Introductory Cd rom, with start up demo video as well as a pdf manual
1 Warranty card + set up guide
We provide LIFETIME SUPPORT direct from our factory to the hole world, by email or phone 365 days a year
Picture taken with camera, light, wireless trasnmitter and microphne not included

WHAT ELSE DO YOU NEED, THAT IT IS NOT INCLUDED THAT WE DO NOT SELL:
Any 12v Lcd monitor with HDMI in and out or SDI if you choose the SDI version, we highly recommend something with a compact design.
if you do not have 24v on your camera stabilizer the you will need to buy to us an accessory to ad 24v to your steady and then you must buy 2 V-mount batteries, and its charger.

We only accept bank transfer to our bank account in U.S.A

The price of the steady includes FREE shipping Worldwide door to door delivery by Fedex.

CUSTOMER REVIEWS

5 Star rating

Based on 38 Reviews

100% of the reviews

recommended this products

Ask a Question

Write a Review

I recommend this product

Quick Delivery; Very Nice System; Thanks A++++

If you want to read more reviews, please click on the following link:

https://www.bassonsteady.com/camera-stabilizer-reviews

LEGAL NOTICE: Do not be confused, we are Basson Steady Camera Stabilizers, manufacturers of all kind of camera stabilizers, specially dedicated to manufacture and design wearable type stabilizers, hybrid and mechanic, as well as gimbals, rotary heads, handheld stabilizers and more.

All the camera stabilizers we sell in our website have our own brand name Basson Steady on it, and we do not sell our camera stabilizers with any other competitor brand name or logo, so if you are looking for any other brand of manufacturer you must go to their own website.

The use of a mentioned trademark brand names to describe our goods or services is known as 'nominative fair use' this is a non-infringing use, this brand names are mentioned neither to create confusion, nor to disparaging the trademarked product. It is also permitted to use a trademark as a means for comparison.

Comparative advertising it is also allowed, since it benefits consumers by providing several options and encouraging competition. It is also allowed the use of similar words associated to registered brand names or products mentioned in this website that have become generic with the years due to their name's widespread popularity, it is a non-infringing use.

These are uses that inform, educate, or express opinions protected under the First Amendment of the United States Constitution, freedom of speech and of the press.

By law, you need not request permission to use a trademark belonging to another if it is for an editorial or informational use. Trademark "ownership" is not absolute, you can use a trademark belonging to another person or company if you use the mark for: informational or editorial purposes to identify specific products and services, or if your use is part of an accurate comparative product statement. In other words, the use of a trademark does not necessarily qualify as an infringement if the user is not actually using the trademark as a mark.

Informational Uses of a Trademark Are Permissible Informational (or “editorial”) uses of a trademark do not require permission from its owner.

Finally, you are also permitted to use trademarks for purposes of parody or commentary without fearing a claim of trademark infringement.

Using Trademarks for Comparison Under trademark law you are generally permitted to use a trademark as a means for comparison. For example, you could create a newspaper advertisement that incorporates your mark and your competitors' marks in order to describe a difference between the companies.

A trademark does not mean, however, that no one else can use your word, phrase, or symbol in connection with any and all goods and services. In an effort to promote competition and fair use, the Federal Trade Commission carved an exception to the general rule protecting trademark owners.

Necessary use of a third-party trademark to describe your goods or services is known as 'nominative fair use' this is a non-infringing use where there is no likelihood of confusion.

The fair use doctrine allows a competitor to use a trademarked product name without permission if the use is not likely to create confusion. Nominative use occurs when a business must use a trademarked product name to identify the trademark owner's product. The Federal Trade Commission encourages companies to use comparative advertising, since it benefits consumers by providing several options and encouraging competition.

According to the Federal Trade commission, companies can use a trademark owner's product name for comparative advertising purposes, as long as the competitor is not disparaging the trademarked product or its owner and can substantiate its claim.