Basson Steady New Products Just Released ENDLESS 3, hybrid electro-mechanic camera stabilizer, stead
Updated: Jan 5
Basson Steady camera stabilizers just launched a new line of hybrid camera stabilizers, models ENDLESS 3 Silverarrow payload 7,5kgs or 16,5kgs, ENDLESS 3 Blackbee payload 7,5kgs or 14,5kgs and ENDLESS 3 Silverlight payload 7,5kgs, or 12,5kgs.
For more information please visit our web site: https://www.bassonsteady.com
New 8 axis hybrid camera stabilizers from Basson Steady camera stabilizers, electro mechanic gimbal stabilizer steadycam.
Basson Steady camera stabilizer was founded in 1997, exclusively dedicated to the manufacture and design of professional video camera stabilizers, has been selling its products worldwide since its beginning.
From now on, you can make any technical request and receive technical support from a local phone number, we speak in English and Spanish.
Our direct telephone number in U.S.A:
Miami U.S.A: +1 (305) 83-44752
or you can check all our phone contacts in the following link:
This NEW HYBRID Steadycam Basson Steady 8 axis camera stabilizer it's a mix between physic-mechanic and electronic, best of both worlds, it comes with an electronic board controller that will help you hold the camera HORIZONTALLY STABLE all the time.
And you still have the power to control the rotation with your hand on the gimbal as always to point your camera wherever you want. With this version you can also lock the electronic pitch, depending on the shot, you may want to disconnect and lock the PITCH motor to control the PITCH and ROTATION manually with your hands as with any regular steady in order to let you point your camera wherever you want.
This way you will let you tilt up and down up the camera up to 45 degrees without loosing the Electronic horizon stabilization.
The main difference between Steadycam Basson Steady camera stabilizer ENDLESS and Steadycam Basson Steady camera stabilizer INFINIA, is that ENDLESS has dual electronic auto stabilized motors for horizon and pitch, and the Infinia version only one electronic auto stabilized motor for the horizon.
Then the Infinia version is capable to hold 1 inch taller and also 1 inch longer cameras due that you don't need any extra space to swivel and balance the camera as it has no electronic pitch. You can go from High mode to low mode in just 3 seconds.
Now supports bigger cameras, the maximum recommended camera sizes are, 45cm length, 20cms height and 18cm width, and if you turn off the pitch motor you can use cameras, up to 48cm length, 22cm height and 18cm width.
It works with SILENT MOTORS, It's noice less, so you can now use at live events and also use the sound of your camera microphone. It comes with dual battery power sources, it includes 3 V-mount sockets for 14,4v. batteries.
It's a ready to use stabilizer, as any other steady, and for the electronic rotary wheel you just need to press ON button to make it work. It also comes with a new generation of shock absorber arm, this new version works as an ISOLATE double shock absorber arm with 6 springs, top technology for camera stabilization and weight distribution.
This new arm at least DUPLICATE the time you can hold the steady on your body, it also increases the absorption and produce a noticeable reduced fatigue on your back as a result of the isolate effect of the arm. The new CENTER POST can hold two LCD MONITORS, to do that now it comes with a NEW GIMBAL MONITOR MOUNT, that allows you to have the monitor pointing directly to your face at a reduced distance regardless of the angle you are pointing the camera and regardless of the axis of the steady.
You can now shoot backwards while walking forward with your steady without compromising framing your shoot and also allows you to verify without any effort if the FOCUS IS CORRECT OR NOT. So there are NO MORE BLIND SPOTS.
This new monitor mount comes with a 14.4volts power cable and also an HDMI cable, this new way to mount the LCD MONITOR comes with a male 1/4" screw to hold any LCD monitor, we recommend to use a small LCD monitor such as the 7" smallhd or the new 5" smallhd monitor.
The other option with this gimbal monitor mount, due that the new cameras comes with bluetooth, is to use your own small tablet such as an ipad mini, iphone or android smart phone to use it as a monitor just by adding any holder compatible with your device with a female 1/4" socket.
Another tip is that you can use the female lighter plug that is located at the bottom of the center post, to plug any a male lighter plug with USB charger with dual outputs to power or to charge any of the accessories you may want to use with this new hybrid camera stabilizer.
Today all new devices have can be charged via USB, so you can take advantage of that and power or charge any device such as the wireless lens controller hand unit and motor, as well as any other device such as your Cell Phone that can be used to monitor and to take full control of your video camera via app, or to power any USB led light, you can also charge or power any USB power bank.
For example on this photo we are using the the Male lighter plug Smart Car Finder from ZUS. that its not only a high quality dual USB charger but also a safety measure for the steady that thru an app on your cellphone will tell you where is your steady on a map.
So each time you turn on the steady the app will point exactly where it is on a map thru the app on your cell phone. This new Steadycam Basson Steady camera stabilizer 8 axis hybrid camera stabilizers are easy comparable to the Arri trinity rig, or to the mk-v ar rotary head systems, all different designs and products with one thing in common, all high end hybrid electro mechanic gimbal steadicam camera stabilizers.
All brand names, models, trademarks, and registered trademarks mentioned in this description are property of their legal owners and are being used here only for description.
Steadycam Basson Steady camera stabilizers in U.S.A (United States)
For more information or for specific requests, please contact our customer service:
Miami U.S.A: +1 (305) 83-44752
Tel / whatsapp: + (54911) 44726757
(Monday to Friday from 10.00 to 17.00 (U.S.A eastern time)